In Nederland you destroy mineralized water but in Russia demineralized water destroy you :)
scott
2 July 2019 at 05:52
worst camera same issue unplugged from another nvr into another nvr using poe black screen nothing not ip expert but i did see on you tube how too reset hik shit camera guy used his shot gun shame i don’t live in america now telling people not to buy them going back too swan cheaper and bye 10 of them for same price
Monkey
25 June 2019 at 01:31
Hi Roel,
Do you Have any idea how the third partition is utilized by hs4 to store the project? Is it possible to recover an otherwise lost project from the homeserver back to Gira Expert Software somehow? Whats going on with hdc3? Is there somekind of Raw Data stored on it? Do you know why it doesnt contain proper filesystem? I really wanna know what kind of data it stores…
thanks in advance, I am really looking forward to your answer. Please send me an E-Mail,
sincerely
Monkey
Johannes
7 March 2019 at 22:01
Dear Roel,
thank you for the possibility to download and try ETS 5.5.2 Professional (update only). I have a sample project created with ETS 5.7 Professional (latest version). How I can open it with your version?
Thanks for your support!
I have now used it over 10 years, About 2.000.000 liters of water (2.000 m3) have flow through it.
I moved it a few times to another room, I disconnected it a few times (for more than a month), had some very intensive days (over 15.000 liters a day), the salt compartment sometimes had been empty for more than 1 month.. And it is still working and actually in excellent condition.
Sooner or later I’ll have to refresh/refill the inside (resin), but that’s not needed so far cause it’s working still great!
Dan
3 February 2018 at 02:11
Hello! I have also a tv ue55 es8000 and i messed up the setings in Service meniu and now i dont have channel option in meniu (the function CHANNEL is greyd) and when i hit enter to select it appear a pop up “this function is not available” the only way is to enter in internet option and selected from there! PLEASE SOME HELP !
Tony
15 January 2018 at 04:03
hello, I needed to advise, my parents bought a new better TV and they gave us the TV we had. It is SAMSUNG Model Code: UE46F5300AWXZH Version No: TS01 is the model of 2013, and I have a problem that concerns the service menu, I have this menu with the help of -Info-Menu-Mute-Power, the screen showed me the service menu that I used to go through the arrows but unfortunately I had a 7-month granddaughter who loves to push the phones, drivers etc. (I’m afraid I do not know what it was) to squeeze something, and I’ve already seen how it’s up to downloading the update, in fear of ignorance of the update, so I turn off the remote control with the assumption that nothing happens.
Unfortunately, when I wanted the TV to run again so the TV failed to run, I folded the whole machine out of the socket and again after about 1 minute turned on when I noticed that the IR.TV light does not turn on using the button on the TV and can not run even with the driver, so I would like to ask if you know what the problem could be?
I will be grateful for any advice. I tried the “UNBRICK..INFO / MENU / MUTE / POWER / ENTER / DOWN / DOWN / ENTER / LEFT / RETURN / POWER..no working :(
I know the default password for ComfoAir Compact CA155WM / CA155CM is: 1010
Although I don’t think they use the same for the service menu here, but we can try.. I saw some other Zehnder devices using 11111 or 1234. Maybe it’s only numeric and we can try to hack/attack it in some way.
AGuY
10 October 2017 at 21:55
I have downloaded the Version 4.5 Gira Expert. In this Version and in the Version 4.3 (the only other I could find on the Gira Website) their is no dir like “C:\Program Files\Gira\HS+FS\exp232\EN\firmware”. I could find a file “firmeware” but the internal structur of that zip was changes. In their was no HSERVER2.TGZ or HSERVER3.TGZ or HSERVER4.TGZ file.
The content is:
DOLINUX2.BAT
INHALT.TXT
INITRD
LOADLIN2.EXE
VMLINUZ
If have tried to open VMLINUZ like a .zip or .tar.gz, but it didn’t work.
If I start the LOADLIN2.EXE it comes an 16-Bit Error.
The BAT just starts the LOADLIN2.EXE with a couple of params.
Does anyone has a solution.
Thanks
Wilson B
6 October 2017 at 04:37
Heya brother,
I stumbled on you page and wanted to ask for a favor..
HELP
I Have a ;
Samsung 60″ 2012 Smart TV
UN60ES8000FXZA
Region USA – Central
PLEASE PLEASE PLEASE…
Could you take pictures of your Service Menu settings?
I mucked with mine and have never been able to put them back. I messed with them trying to get the wifi working again after the firmware update.
(I know MY BAD- and should have taken pictures before messing in there)
Now the stupid Samsung app keeps updating constantly and rebooting TV.
ANY model of ES8000F series might sufice.. PLEASE PLEASE-
Taking clear pictures of each section shouldn’t take long.
:confuse d:The service manual settings I read don’t jiv correctly.
wilsonb(AT)POBOXdotCOM
Thanks
Mischa
9 August 2017 at 23:09
Hi,
can anyone confirm if it’s still possible (in theory) to use the latest Gira Expert software on different hardware than a genuine HomeServer?
Best regards
Hans
26 June 2017 at 17:20
Is het inmiddels al bekend wat de inloggegevens voor de service software zijn?
Does this still work for the latest HomeServer 4/FacilityServer – Software Version 4.5.0?
Klayman
10 February 2017 at 00:41
Hi, have you ever got it working? Mine fails with a “Keine Berechtigung” error, so I assume my MAC is incorrect or they found another way to read it out…
best regards,
Klayman
Klayman
4 February 2017 at 17:34
Hi, I’m getting “Falscher Startparameter” when running HS on a XenServer VM. Could it be that my 3rd hdd is/dev/sda instead of hda?
regards,
Klayman
testi
22 January 2017 at 19:45
GIRA_-_Experte_-_Setup_-_v4.111.0.zip could someone reupload ?Thx
Tobi7
7 December 2016 at 16:39
Would be great to get a new link to the VM download.
Thanks in advance.
Me
17 November 2016 at 06:59
The official release 4.5 is out, but its not the same as the beta version. Its missing the ip logic stuff and is still running in old environment.
Me
14 November 2016 at 17:25
Sorry, but i have no windows Hyper-V server and no clue how to create an image for that system.
Final release should be Today (14-11-2016) and otherwise this week (WEEK 46).
An update to the Gira iOS APP 4.2.2 will also be there today or this week, however, the RGB colorwheel function is probably not fixed..;)
@Me. Will you upload a new Hyper-V image?
Me
14 November 2016 at 15:11
Thx for the upload, i have the 4.5 beta running with VMWare ESXi without problems (needs a new builded actual matching kernel though).
I cannot find much about the new ip logic feature yet, but on the debug page:
WS
URI ENDPOINTS/WS
S/WQ/RQ/WS/RS 0/0/0/0/0
Total 0
Active 0
Error 0
keys 0
count 0
max_conn_per_key 0
IP Anz. Send Last Send Anz. Recv Last Recv ID State
Authentication failed
IP Timestamp Count Username
Seems to be something about the new feature, but i cannot find it documented in the help, will have to wait for the final release coming soon..
^^ Leak and Upload it either talking ;) I do things like that too ;)
Eric
28 October 2016 at 10:47
@Roel, it seems only accessible for a group of beta-users. I have no idea why i have been selected.
The new version should support direct TCP/IP from the logic. But i don’t get it installed on my VM.
itarch
6 September 2016 at 11:56
@panduit: was genau bekommst Du da nicht hin.
mir ist aufgefallen, dass das fertige HS Image eben eine vorkonfigurierte IP Adresse hat. Da man nach dem Start auf diese sofort zugreifen kann, habe ich auch versucht diese auf OS eben zu ändern.
Dabei ist mir aufgefallen, dass nach erfolgreicher Umstellung der IP Adresse (/etc/networks/interfaces) und fortfolgender reboot der VM, die frisch eingestellt ip adresse durch die in HS vorinstallierte erneut verändert wurde.
Was ich dann gemacht habe ist, die VM (im offline zustand) netzwerkseitig auf host only network umzustellen. Danach den entsprechenden VMNET Adapter (1 oder 8) fest auf das Subnetz der (vom HS) voreingestellten IP adresse zu konfigurieren. Danach VM starten, im Expert an der entsprechender Stelle die IP setzen, die man braucht, die Konfig übertragen, die VM rebootet und kommt mit der gewünschten IP hoch. Damit die VM aber erreichbar ist, habe ich die VM erneut runtergefahren und wie oben beschrieben, jetzt von host-only auf bridged umkonfiguriert. (Der Vollständigkeit, sollte man den host-only VMNET Adapter wieder auf DHCP umstellen). Danach VM starten und die/der VM/HS hängt im gleichen Subnetz wie der/das KNXIP-Router/-Interface und der eigene PC auf dem die Expert Software läuft.
Hello,
i there a way to get an original image of an HS4 server ?
I have a original HS4 Server but my hdd have an error and do not boot :(
So i bought a 128MB DOM disk and i want to install the HS4 on it.
But i don’t know how.
I think an alternativ is the version with the freeDOS to boot and the DOM for the hdc / data partition.
But i think a original is better ;)
Thank you
Micha79
27 May 2016 at 21:16
Hallo,
ich brauche etwas Hilfe.
Ich probiere seid Tagen mit den Igel TC´s rum.
Habe den UD 5 und nun hier den M310C. Bei beiden ist beim
Ausführen von EEPROM folgende Meldung :
” Wrong Adapter Number ! ”
was mache ich falsch. Ich habe schon alle mögliche Versuche gestartet.
Alles andere lief perfekt, nur halt die MAC änderung nicht.
#vielen Dank
steff
27 May 2016 at 08:11
Can I use the push function with the VM Version of the HS4?
A few remarks:
I couldn’t unrar the second INITRD using winrar, it kept giving me an error. Copied it to my macbook and used the tool “The Unarchiever” to extract and it worked. Then used SCP to copy the Files to the HS via SSH.
In my case, only the file eibusb had the permissions set to 105:nogroup, the other files mentioned had root:root set. Therefor I only changed the Permissions for eibusb.
I accidentialy copied the INITRD file to the wrong location at first try, but the VM booted anyway, so not sure if it really is necessary. Put it in the right location afterwards anyway, just to make sure.
nils
6 April 2016 at 18:41
Hello guys,
i builded many hs on native hardware, but now the fujitsu D3003-S1 is no longer aviable. I have ordered a newer one the D3313-S1, but the image won´t start. loadlin tell me, it were not an image file.
Someone an Idea?
thanks
Kevin
9 February 2016 at 15:54
I´m searching for an update from 4.2 to 4.4 for VM Ware Player.
A Firmware Update with the Experte 4.4 is not running on a 4.2 VM Ware Image.
Kevin
3 February 2016 at 16:50
Hallo.
Is there a 4.4 VMWare image?
Thanks
matthiass
1 February 2016 at 21:11
maybe someone can upload sonos plugins and other and we hack them….
timo
31 January 2016 at 16:24
gibt es evtl auch den sonos-baustein mit lizenz für eine der hs4-mac-adressen?
matthiass
28 January 2016 at 23:25
Does somebody has tried to rebuild the gira tks ip gateway ?
f.e. with a raspberry pi ?
matthiass
28 January 2016 at 23:25
Does somebody has tried to rebuild the gira tks ip gateway ?
mare
10 January 2016 at 17:44
Hi,
I’m using the Hyper-V Image with HS 4.2 from the download thread, post #1436. Thanks to wolfman!!!
It uses the MAC/Serial 000AB30229F8.
I can change the dmidecode skript for example to 000AB30229F9.
But if I use other MAC addresses that should work, for example 004063CA2E70 or 004063F916B3, it says “keine Berechtigung”, so it doesn’t accept those.
I have to change the serial because of some plugins.
Does anybody know why I can’t use those MACs?
I really appreciate your help.
oldschool
30 December 2015 at 22:22
hi there,
i tried to install fw4.2 with hs3 to a ubuntu 14.04 x64.
Still struggling with a problem named in post #1983 by rickcn:
“ImportError: The _imaging C module is not installed”
I have already amended the PYTHONPATH in starths.sh to represent the python2.7 environment, unfortunately without success.
any ideas? someons got it running on ubuntu 14.04/x64?
pessletz
26 December 2015 at 15:13
i can run the 4.2 image on hyperv its nice
is it possible to change the mac/serialnumber to give him an original serialnumber
thank you
jmaduncan
15 December 2015 at 23:09
I am in the same place as Marcus from last year in that I have set this up added the PUT verbs etc. and the phone tells me Backup Successful but the file never shows up in the backup folder. Or anywhere else for that matter. I also get a message 200 in the IIS logs. Any help would be appreciated.
I’m very sorry! WordPress updated to 4.4 and probably introduced a new setting to break comments into pages and enable that setting :(
I see there is a new Home Server 4.4 update.
Hope Gira is comming with an iPhone APP update. Furthermore, let’s see what the LightBuilding will bring us. I there is anyone with tickets or wants a Meet, mail me!
matthiass
13 December 2015 at 08:16
Old posts are missing…gladly i saved that site :D
For those who didnt…
btw…the gira hs isnt that big thing anymore… Gira is just talking and don’t bring out that stuff what they are talking about…look at the hs updates with rgb and the tks updates…btw.
Hi, did someone tried emulate HomeServer 4?
In Nederland you destroy mineralized water but in Russia demineralized water destroy you :)
worst camera same issue unplugged from another nvr into another nvr using poe black screen nothing not ip expert but i did see on you tube how too reset hik shit camera guy used his shot gun shame i don’t live in america now telling people not to buy them going back too swan cheaper and bye 10 of them for same price
Hi Roel,
Do you Have any idea how the third partition is utilized by hs4 to store the project? Is it possible to recover an otherwise lost project from the homeserver back to Gira Expert Software somehow? Whats going on with hdc3? Is there somekind of Raw Data stored on it? Do you know why it doesnt contain proper filesystem? I really wanna know what kind of data it stores…
thanks in advance, I am really looking forward to your answer. Please send me an E-Mail,
sincerely
Monkey
Dear Roel,
thank you for the possibility to download and try ETS 5.5.2 Professional (update only). I have a sample project created with ETS 5.7 Professional (latest version). How I can open it with your version?
Thanks for your support!
I have now used it over 10 years, About 2.000.000 liters of water (2.000 m3) have flow through it.
I moved it a few times to another room, I disconnected it a few times (for more than a month), had some very intensive days (over 15.000 liters a day), the salt compartment sometimes had been empty for more than 1 month.. And it is still working and actually in excellent condition.
Sooner or later I’ll have to refresh/refill the inside (resin), but that’s not needed so far cause it’s working still great!
Hello! I have also a tv ue55 es8000 and i messed up the setings in Service meniu and now i dont have channel option in meniu (the function CHANNEL is greyd) and when i hit enter to select it appear a pop up “this function is not available” the only way is to enter in internet option and selected from there! PLEASE SOME HELP !
hello, I needed to advise, my parents bought a new better TV and they gave us the TV we had. It is SAMSUNG Model Code: UE46F5300AWXZH Version No: TS01 is the model of 2013, and I have a problem that concerns the service menu, I have this menu with the help of -Info-Menu-Mute-Power, the screen showed me the service menu that I used to go through the arrows but unfortunately I had a 7-month granddaughter who loves to push the phones, drivers etc. (I’m afraid I do not know what it was) to squeeze something, and I’ve already seen how it’s up to downloading the update, in fear of ignorance of the update, so I turn off the remote control with the assumption that nothing happens.
Unfortunately, when I wanted the TV to run again so the TV failed to run, I folded the whole machine out of the socket and again after about 1 minute turned on when I noticed that the IR.TV light does not turn on using the button on the TV and can not run even with the driver, so I would like to ask if you know what the problem could be?
I will be grateful for any advice. I tried the “UNBRICK..INFO / MENU / MUTE / POWER / ENTER / DOWN / DOWN / ENTER / LEFT / RETURN / POWER..no working :(
I got my TV’s finally back on the wall, so I will create the screenshots these days.
Someone got the latest version running on ESX and is willing to upload ?
:-(
I know the default password for ComfoAir Compact CA155WM / CA155CM is: 1010
Although I don’t think they use the same for the service menu here, but we can try.. I saw some other Zehnder devices using 11111 or 1234. Maybe it’s only numeric and we can try to hack/attack it in some way.
I have downloaded the Version 4.5 Gira Expert. In this Version and in the Version 4.3 (the only other I could find on the Gira Website) their is no dir like “C:\Program Files\Gira\HS+FS\exp232\EN\firmware”. I could find a file “firmeware” but the internal structur of that zip was changes. In their was no HSERVER2.TGZ or HSERVER3.TGZ or HSERVER4.TGZ file.
The content is:
DOLINUX2.BAT
INHALT.TXT
INITRD
LOADLIN2.EXE
VMLINUZ
If have tried to open VMLINUZ like a .zip or .tar.gz, but it didn’t work.
If I start the LOADLIN2.EXE it comes an 16-Bit Error.
The BAT just starts the LOADLIN2.EXE with a couple of params.
Does anyone has a solution.
Thanks
Heya brother,
I stumbled on you page and wanted to ask for a favor..
HELP
I Have a ;
Samsung 60″ 2012 Smart TV
UN60ES8000FXZA
Region USA – Central
PLEASE PLEASE PLEASE…
Could you take pictures of your Service Menu settings?
I mucked with mine and have never been able to put them back. I messed with them trying to get the wifi working again after the firmware update.
(I know MY BAD- and should have taken pictures before messing in there)
Now the stupid Samsung app keeps updating constantly and rebooting TV.
ANY model of ES8000F series might sufice.. PLEASE PLEASE-
Taking clear pictures of each section shouldn’t take long.
:confuse d:The service manual settings I read don’t jiv correctly.
wilsonb(AT)POBOXdotCOM
Thanks
Hi,
can anyone confirm if it’s still possible (in theory) to use the latest Gira Expert software on different hardware than a genuine HomeServer?
Best regards
Is het inmiddels al bekend wat de inloggegevens voor de service software zijn?
Hi,
I want to control my Gardena Smart Water Control via php. I have seen your question at http://www.dxsdata.com/de/2016/07/php-class-for-gardena-smart-system-api/.
I am not able to send commands to the watercontrol. Did you got it? Perhaps you can helo me.
BR
Michael
Does this still work for the latest HomeServer 4/FacilityServer – Software Version 4.5.0?
Hi, have you ever got it working? Mine fails with a “Keine Berechtigung” error, so I assume my MAC is incorrect or they found another way to read it out…
best regards,
Klayman
Hi, I’m getting “Falscher Startparameter” when running HS on a XenServer VM. Could it be that my 3rd hdd is/dev/sda instead of hda?
regards,
Klayman
GIRA_-_Experte_-_Setup_-_v4.111.0.zip could someone reupload ?Thx
Would be great to get a new link to the VM download.
Thanks in advance.
The official release 4.5 is out, but its not the same as the beta version. Its missing the ip logic stuff and is still running in old environment.
Sorry, but i have no windows Hyper-V server and no clue how to create an image for that system.
Final release should be Today (14-11-2016) and otherwise this week (WEEK 46).
An update to the Gira iOS APP 4.2.2 will also be there today or this week, however, the RGB colorwheel function is probably not fixed..;)
@Me. Will you upload a new Hyper-V image?
Thx for the upload, i have the 4.5 beta running with VMWare ESXi without problems (needs a new builded actual matching kernel though).
I cannot find much about the new ip logic feature yet, but on the debug page:
WS
URI ENDPOINTS/WS
S/WQ/RQ/WS/RS 0/0/0/0/0
Total 0
Active 0
Error 0
keys 0
count 0
max_conn_per_key 0
IP Anz. Send Last Send Anz. Recv Last Recv ID State
Authentication failed
IP Timestamp Count Username
Seems to be something about the new feature, but i cannot find it documented in the help, will have to wait for the final release coming soon..
Here you go, i’m very interested in the new feature (IP from logic).
Hope someone gets it working in VM.
http://www.megafileupload.com/c6p9/GIRA_-_Experte_-_Setup_-_v4.111.0.zip
^^ Leak and Upload it either talking ;) I do things like that too ;)
@Roel, it seems only accessible for a group of beta-users. I have no idea why i have been selected.
The new version should support direct TCP/IP from the logic. But i don’t get it installed on my VM.
@panduit: was genau bekommst Du da nicht hin.
mir ist aufgefallen, dass das fertige HS Image eben eine vorkonfigurierte IP Adresse hat. Da man nach dem Start auf diese sofort zugreifen kann, habe ich auch versucht diese auf OS eben zu ändern.
Dabei ist mir aufgefallen, dass nach erfolgreicher Umstellung der IP Adresse (/etc/networks/interfaces) und fortfolgender reboot der VM, die frisch eingestellt ip adresse durch die in HS vorinstallierte erneut verändert wurde.
Was ich dann gemacht habe ist, die VM (im offline zustand) netzwerkseitig auf host only network umzustellen. Danach den entsprechenden VMNET Adapter (1 oder 8) fest auf das Subnetz der (vom HS) voreingestellten IP adresse zu konfigurieren. Danach VM starten, im Expert an der entsprechender Stelle die IP setzen, die man braucht, die Konfig übertragen, die VM rebootet und kommt mit der gewünschten IP hoch. Damit die VM aber erreichbar ist, habe ich die VM erneut runtergefahren und wie oben beschrieben, jetzt von host-only auf bridged umkonfiguriert. (Der Vollständigkeit, sollte man den host-only VMNET Adapter wieder auf DHCP umstellen). Danach VM starten und die/der VM/HS hängt im gleichen Subnetz wie der/das KNXIP-Router/-Interface und der eigene PC auf dem die Expert Software läuft.
@Eric, Were did you downloaded the (new) beta 4.5? Is it only Experte 4.5 or also a new Firmware 4.5? (link?)
Hi,
has anyone tried upgrading to the new 4.5 betaversion ?
It supports direct TCP/IP from logik and full Python, if i am correct…
hallo versuche schon seit tagen den hs als vm ans laufen zu kriegen bekomme einfach die netzwerk einstellungen in vmware nicht hin
kann mir wer helfen danke in vorraus
This image V4.4 https://cloud.mail.ru/public/rni5/ZxenjPXPX based on post http://www.roelbroersma.nl/2009/11/07/building-your-own-gira-homeserver#75059
ip 192.168.0.11
Programm WinRar
This image is updated from version 4.2 to version 4.4 in the following instructions: http://www.roelbroersma.nl/forums/topic/hs4-update-4-4/#post-1765
update method the same like (4.3) http://www.roelbroersma.nl/forums/topic/hs-update-4-3/#post-1741
upload firmware.dat to HS eg /home/temp directory
a) rename firmware.dat file to firmware.zip
b) extract INITRD file from firmware.zip (eg unzip)
c) rename INITRD to INITRD.gz
d) gzip -d INITRD.gz
e) cpio -i < ./INITRD
f) copy listed directories (/hs /lib /usr) to /
g) restart HS, upload new project
Version 4.4
http://www.megafileupload.com/e2M7/firmware.dat
cp -r -f /tmp/hs/* /hs
cp -r -f /tmp/lib/* /lib
cp -r -f /tmp/usr/* /usr
Hello,
i there a way to get an original image of an HS4 server ?
I have a original HS4 Server but my hdd have an error and do not boot :(
So i bought a 128MB DOM disk and i want to install the HS4 on it.
But i don’t know how.
I think an alternativ is the version with the freeDOS to boot and the DOM for the hdc / data partition.
But i think a original is better ;)
Thank you
Hallo,
ich brauche etwas Hilfe.
Ich probiere seid Tagen mit den Igel TC´s rum.
Habe den UD 5 und nun hier den M310C. Bei beiden ist beim
Ausführen von EEPROM folgende Meldung :
” Wrong Adapter Number ! ”
was mache ich falsch. Ich habe schon alle mögliche Versuche gestartet.
Alles andere lief perfekt, nur halt die MAC änderung nicht.
#vielen Dank
Can I use the push function with the VM Version of the HS4?
http://www.roelbroersma.nl/forums/topic/hs-4-0-on-hardware/page/2/#post-1831
Hi guys,
just wanted to report: 4.4 on ESXi 5.5 running fine after updating the Firmware as described here:
http://www.roelbroersma.nl/forums/topic/anleitung-update-hs-4-1-auf-4-2
Updating via Experte ended in the VM rebooting all the time.
Make a Backup prior to updating!!!
A few remarks:
I couldn’t unrar the second INITRD using winrar, it kept giving me an error. Copied it to my macbook and used the tool “The Unarchiever” to extract and it worked. Then used SCP to copy the Files to the HS via SSH.
In my case, only the file eibusb had the permissions set to 105:nogroup, the other files mentioned had root:root set. Therefor I only changed the Permissions for eibusb.
I accidentialy copied the INITRD file to the wrong location at first try, but the VM booted anyway, so not sure if it really is necessary. Put it in the right location afterwards anyway, just to make sure.
Hello guys,
i builded many hs on native hardware, but now the fujitsu D3003-S1 is no longer aviable. I have ordered a newer one the D3313-S1, but the image won´t start. loadlin tell me, it were not an image file.
Someone an Idea?
thanks
I´m searching for an update from 4.2 to 4.4 for VM Ware Player.
A Firmware Update with the Experte 4.4 is not running on a 4.2 VM Ware Image.
Hallo.
Is there a 4.4 VMWare image?
Thanks
maybe someone can upload sonos plugins and other and we hack them….
gibt es evtl auch den sonos-baustein mit lizenz für eine der hs4-mac-adressen?
Does somebody has tried to rebuild the gira tks ip gateway ?
f.e. with a raspberry pi ?
Does somebody has tried to rebuild the gira tks ip gateway ?
Hi,
I’m using the Hyper-V Image with HS 4.2 from the download thread, post #1436. Thanks to wolfman!!!
It uses the MAC/Serial 000AB30229F8.
I can change the dmidecode skript for example to 000AB30229F9.
But if I use other MAC addresses that should work, for example 004063CA2E70 or 004063F916B3, it says “keine Berechtigung”, so it doesn’t accept those.
I have to change the serial because of some plugins.
Does anybody know why I can’t use those MACs?
I really appreciate your help.
hi there,
i tried to install fw4.2 with hs3 to a ubuntu 14.04 x64.
Still struggling with a problem named in post #1983 by rickcn:
“ImportError: The _imaging C module is not installed”
I have already amended the PYTHONPATH in starths.sh to represent the python2.7 environment, unfortunately without success.
any ideas? someons got it running on ubuntu 14.04/x64?
i can run the 4.2 image on hyperv its nice
is it possible to change the mac/serialnumber to give him an original serialnumber
thank you
I am in the same place as Marcus from last year in that I have set this up added the PUT verbs etc. and the phone tells me Backup Successful but the file never shows up in the backup folder. Or anywhere else for that matter. I also get a message 200 in the IIS logs. Any help would be appreciated.
Thanks
I’m very sorry! WordPress updated to 4.4 and probably introduced a new setting to break comments into pages and enable that setting :(
I see there is a new Home Server 4.4 update.
Hope Gira is comming with an iPhone APP update. Furthermore, let’s see what the LightBuilding will bring us. I there is anyone with tickets or wants a Meet, mail me!
Old posts are missing…gladly i saved that site :D
For those who didnt…
btw…the gira hs isnt that big thing anymore… Gira is just talking and don’t bring out that stuff what they are talking about…look at the hs updates with rgb and the tks updates…btw.
https://web.archive.org/web/20150414024756/http://www.roelbroersma.nl/2009/11/07/building-your-own-gira-homeserver
Hallo.
Is there a 4.3 VMWare image?
Thanks
All the old posts are missing – why?
Hallo!
********************************************************
Benötigt jemand HS3 voll Funktions- und Updatefähig?
********************************************************
Inkl. Netzteil und allen Kabeln.
Link zu den Bildern:
http://gofile.me/6nlOW/Bmnx3NLF
http://gofile.me/6nlOW/jiYYmLmQ
http://gofile.me/6nlOW/K0TcYFGz
hansinr1974@gmail.com
MfG
Ok i overlooked the 1656 post. TKS works great with this hint!