Forum Role: Participant
Topics Started: 6
Replies Created: 33
Hi, did someone tried emulate HomeServer 4?
In Nederland you destroy mineralized water but in Russia demineralized water destroy you :)
worst camera same issue unplugged from another nvr into another nvr using poe black screen nothing not ip expert but i did see on you tube how too reset hik shit camera guy used his shot gun shame i don’t live in america now telling people not to buy them going back too swan cheaper and bye 10 of them for same price
Do you Have any idea how the third partition is utilized by hs4 to store the project? Is it possible to recover an otherwise lost project from the homeserver back to Gira Expert Software somehow? Whats going on with hdc3? Is there somekind of Raw Data stored on it? Do you know why it doesnt contain proper filesystem? I really wanna know what kind of data it stores…
thanks in advance, I am really looking forward to your answer. Please send me an E-Mail,
thank you for the possibility to download and try ETS 5.5.2 Professional (update only). I have a sample project created with ETS 5.7 Professional (latest version). How I can open it with your version?
Thanks for your support!
I have now used it over 10 years, About 2.000.000 liters of water (2.000 m3) have flow through it.
I moved it a few times to another room, I disconnected it a few times (for more than a month), had some very intensive days (over 15.000 liters a day), the salt compartment sometimes had been empty for more than 1 month.. And it is still working and actually in excellent condition.
Sooner or later I’ll have to refresh/refill the inside (resin), but that’s not needed so far cause it’s working still great!
Hello! I have also a tv ue55 es8000 and i messed up the setings in Service meniu and now i dont have channel option in meniu (the function CHANNEL is greyd) and when i hit enter to select it appear a pop up “this function is not available” the only way is to enter in internet option and selected from there! PLEASE SOME HELP !
hello, I needed to advise, my parents bought a new better TV and they gave us the TV we had. It is SAMSUNG Model Code: UE46F5300AWXZH Version No: TS01 is the model of 2013, and I have a problem that concerns the service menu, I have this menu with the help of -Info-Menu-Mute-Power, the screen showed me the service menu that I used to go through the arrows but unfortunately I had a 7-month granddaughter who loves to push the phones, drivers etc. (I’m afraid I do not know what it was) to squeeze something, and I’ve already seen how it’s up to downloading the update, in fear of ignorance of the update, so I turn off the remote control with the assumption that nothing happens.
Unfortunately, when I wanted the TV to run again so the TV failed to run, I folded the whole machine out of the socket and again after about 1 minute turned on when I noticed that the IR.TV light does not turn on using the button on the TV and can not run even with the driver, so I would like to ask if you know what the problem could be?
I will be grateful for any advice. I tried the “UNBRICK..INFO / MENU / MUTE / POWER / ENTER / DOWN / DOWN / ENTER / LEFT / RETURN / POWER..no working :(
I got my TV’s finally back on the wall, so I will create the screenshots these days.
Someone got the latest version running on ESX and is willing to upload ?
I know the default password for ComfoAir Compact CA155WM / CA155CM is: 1010
Although I don’t think they use the same for the service menu here, but we can try.. I saw some other Zehnder devices using 11111 or 1234. Maybe it’s only numeric and we can try to hack/attack it in some way.
I have downloaded the Version 4.5 Gira Expert. In this Version and in the Version 4.3 (the only other I could find on the Gira Website) their is no dir like “C:\Program Files\Gira\HS+FS\exp232\EN\firmware”. I could find a file “firmeware” but the internal structur of that zip was changes. In their was no HSERVER2.TGZ or HSERVER3.TGZ or HSERVER4.TGZ file.
The content is:
If have tried to open VMLINUZ like a .zip or .tar.gz, but it didn’t work.
If I start the LOADLIN2.EXE it comes an 16-Bit Error.
The BAT just starts the LOADLIN2.EXE with a couple of params.
Does anyone has a solution.
I stumbled on you page and wanted to ask for a favor..
I Have a ;
Samsung 60″ 2012 Smart TV
Region USA – Central
PLEASE PLEASE PLEASE…
Could you take pictures of your Service Menu settings?
I mucked with mine and have never been able to put them back. I messed with them trying to get the wifi working again after the firmware update.
(I know MY BAD- and should have taken pictures before messing in there)
Now the stupid Samsung app keeps updating constantly and rebooting TV.
ANY model of ES8000F series might sufice.. PLEASE PLEASE-
Taking clear pictures of each section shouldn’t take long.
:confuse d:The service manual settings I read don’t jiv correctly.
can anyone confirm if it’s still possible (in theory) to use the latest Gira Expert software on different hardware than a genuine HomeServer?
Is het inmiddels al bekend wat de inloggegevens voor de service software zijn?
I want to control my Gardena Smart Water Control via php. I have seen your question at http://www.dxsdata.com/de/2016/07/php-class-for-gardena-smart-system-api/.
I am not able to send commands to the watercontrol. Did you got it? Perhaps you can helo me.
Does this still work for the latest HomeServer 4/FacilityServer – Software Version 4.5.0?
Hi, have you ever got it working? Mine fails with a “Keine Berechtigung” error, so I assume my MAC is incorrect or they found another way to read it out…
Hi, I’m getting “Falscher Startparameter” when running HS on a XenServer VM. Could it be that my 3rd hdd is/dev/sda instead of hda?
GIRA_-_Experte_-_Setup_-_v4.111.0.zip could someone reupload ?Thx
Would be great to get a new link to the VM download.
Thanks in advance.
The official release 4.5 is out, but its not the same as the beta version. Its missing the ip logic stuff and is still running in old environment.
Sorry, but i have no windows Hyper-V server and no clue how to create an image for that system.
Final release should be Today (14-11-2016) and otherwise this week (WEEK 46).
An update to the Gira iOS APP 4.2.2 will also be there today or this week, however, the RGB colorwheel function is probably not fixed..;)
@Me. Will you upload a new Hyper-V image?
Thx for the upload, i have the 4.5 beta running with VMWare ESXi without problems (needs a new builded actual matching kernel though).
I cannot find much about the new ip logic feature yet, but on the debug page:
IP Anz. Send Last Send Anz. Recv Last Recv ID State
IP Timestamp Count Username
Seems to be something about the new feature, but i cannot find it documented in the help, will have to wait for the final release coming soon..
Here you go, i’m very interested in the new feature (IP from logic).
Hope someone gets it working in VM.
^^ Leak and Upload it either talking ;) I do things like that too ;)
@Roel, it seems only accessible for a group of beta-users. I have no idea why i have been selected.
The new version should support direct TCP/IP from the logic. But i don’t get it installed on my VM.
@panduit: was genau bekommst Du da nicht hin.
mir ist aufgefallen, dass das fertige HS Image eben eine vorkonfigurierte IP Adresse hat. Da man nach dem Start auf diese sofort zugreifen kann, habe ich auch versucht diese auf OS eben zu ändern.
Dabei ist mir aufgefallen, dass nach erfolgreicher Umstellung der IP Adresse (/etc/networks/interfaces) und fortfolgender reboot der VM, die frisch eingestellt ip adresse durch die in HS vorinstallierte erneut verändert wurde.
Was ich dann gemacht habe ist, die VM (im offline zustand) netzwerkseitig auf host only network umzustellen. Danach den entsprechenden VMNET Adapter (1 oder 8) fest auf das Subnetz der (vom HS) voreingestellten IP adresse zu konfigurieren. Danach VM starten, im Expert an der entsprechender Stelle die IP setzen, die man braucht, die Konfig übertragen, die VM rebootet und kommt mit der gewünschten IP hoch. Damit die VM aber erreichbar ist, habe ich die VM erneut runtergefahren und wie oben beschrieben, jetzt von host-only auf bridged umkonfiguriert. (Der Vollständigkeit, sollte man den host-only VMNET Adapter wieder auf DHCP umstellen). Danach VM starten und die/der VM/HS hängt im gleichen Subnetz wie der/das KNXIP-Router/-Interface und der eigene PC auf dem die Expert Software läuft.
@Eric, Were did you downloaded the (new) beta 4.5? Is it only Experte 4.5 or also a new Firmware 4.5? (link?)
has anyone tried upgrading to the new 4.5 betaversion ?
It supports direct TCP/IP from logik and full Python, if i am correct…
hallo versuche schon seit tagen den hs als vm ans laufen zu kriegen bekomme einfach die netzwerk einstellungen in vmware nicht hin
kann mir wer helfen danke in vorraus
This image V4.4 https://cloud.mail.ru/public/rni5/ZxenjPXPX based on post http://www.roelbroersma.nl/2009/11/07/building-your-own-gira-homeserver#75059
This image is updated from version 4.2 to version 4.4 in the following instructions: http://www.roelbroersma.nl/forums/topic/hs4-update-4-4/#post-1765
update method the same like (4.3) http://www.roelbroersma.nl/forums/topic/hs-update-4-3/#post-1741
upload firmware.dat to HS eg /home/temp directory
a) rename firmware.dat file to firmware.zip
b) extract INITRD file from firmware.zip (eg unzip)
c) rename INITRD to INITRD.gz
d) gzip -d INITRD.gz
e) cpio -i < ./INITRD
f) copy listed directories (/hs /lib /usr) to /
g) restart HS, upload new project
cp -r -f /tmp/hs/* /hs
cp -r -f /tmp/lib/* /lib
cp -r -f /tmp/usr/* /usr
i there a way to get an original image of an HS4 server ?
I have a original HS4 Server but my hdd have an error and do not boot :(
So i bought a 128MB DOM disk and i want to install the HS4 on it.
But i don’t know how.
I think an alternativ is the version with the freeDOS to boot and the DOM for the hdc / data partition.
But i think a original is better ;)
ich brauche etwas Hilfe.
Ich probiere seid Tagen mit den Igel TC´s rum.
Habe den UD 5 und nun hier den M310C. Bei beiden ist beim
Ausführen von EEPROM folgende Meldung :
” Wrong Adapter Number ! ”
was mache ich falsch. Ich habe schon alle mögliche Versuche gestartet.
Alles andere lief perfekt, nur halt die MAC änderung nicht.
Can I use the push function with the VM Version of the HS4?
just wanted to report: 4.4 on ESXi 5.5 running fine after updating the Firmware as described here:
Updating via Experte ended in the VM rebooting all the time.
Make a Backup prior to updating!!!
A few remarks:
I couldn’t unrar the second INITRD using winrar, it kept giving me an error. Copied it to my macbook and used the tool “The Unarchiever” to extract and it worked. Then used SCP to copy the Files to the HS via SSH.
In my case, only the file eibusb had the permissions set to 105:nogroup, the other files mentioned had root:root set. Therefor I only changed the Permissions for eibusb.
I accidentialy copied the INITRD file to the wrong location at first try, but the VM booted anyway, so not sure if it really is necessary. Put it in the right location afterwards anyway, just to make sure.
i builded many hs on native hardware, but now the fujitsu D3003-S1 is no longer aviable. I have ordered a newer one the D3313-S1, but the image won´t start. loadlin tell me, it were not an image file.
Someone an Idea?
I´m searching for an update from 4.2 to 4.4 for VM Ware Player.
A Firmware Update with the Experte 4.4 is not running on a 4.2 VM Ware Image.
Is there a 4.4 VMWare image?
maybe someone can upload sonos plugins and other and we hack them….
gibt es evtl auch den sonos-baustein mit lizenz für eine der hs4-mac-adressen?
Does somebody has tried to rebuild the gira tks ip gateway ?
f.e. with a raspberry pi ?
Does somebody has tried to rebuild the gira tks ip gateway ?
I’m using the Hyper-V Image with HS 4.2 from the download thread, post #1436. Thanks to wolfman!!!
It uses the MAC/Serial 000AB30229F8.
I can change the dmidecode skript for example to 000AB30229F9.
But if I use other MAC addresses that should work, for example 004063CA2E70 or 004063F916B3, it says “keine Berechtigung”, so it doesn’t accept those.
I have to change the serial because of some plugins.
Does anybody know why I can’t use those MACs?
I really appreciate your help.
i tried to install fw4.2 with hs3 to a ubuntu 14.04 x64.
Still struggling with a problem named in post #1983 by rickcn:
“ImportError: The _imaging C module is not installed”
I have already amended the PYTHONPATH in starths.sh to represent the python2.7 environment, unfortunately without success.
any ideas? someons got it running on ubuntu 14.04/x64?
i can run the 4.2 image on hyperv its nice
is it possible to change the mac/serialnumber to give him an original serialnumber
I am in the same place as Marcus from last year in that I have set this up added the PUT verbs etc. and the phone tells me Backup Successful but the file never shows up in the backup folder. Or anywhere else for that matter. I also get a message 200 in the IIS logs. Any help would be appreciated.
I’m very sorry! WordPress updated to 4.4 and probably introduced a new setting to break comments into pages and enable that setting :(
I see there is a new Home Server 4.4 update.
Hope Gira is comming with an iPhone APP update. Furthermore, let’s see what the LightBuilding will bring us. I there is anyone with tickets or wants a Meet, mail me!
Old posts are missing…gladly i saved that site :D
For those who didnt…
btw…the gira hs isnt that big thing anymore… Gira is just talking and don’t bring out that stuff what they are talking about…look at the hs updates with rgb and the tks updates…btw.
Is there a 4.3 VMWare image?
All the old posts are missing – why?
Benötigt jemand HS3 voll Funktions- und Updatefähig?
Inkl. Netzteil und allen Kabeln.
Link zu den Bildern:
Ok i overlooked the 1656 post. TKS works great with this hint!
Does the own homeserver also works with the tks