Jo VibezJo Vibez
Participant
    2020-12-23 at 17:53
    Post count: 2
    #21900

    Jetzt habe ich mal mit dem 4.11 Image von @sinn3r gespielt es mit einem miniVigor128 USB ISDN-Adapter (hfc-s) probiert. Zumindest wird das Gerät erkannt, aber es funktioniert nicht. Ich habe mal alle debug-Meldungen angehangen. Kann mir vielleicht jemand helfen beim Interpretieren ;-) und Lösung suchen?

    USB

    T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0675 ProdID=1688 Rev= 1.00
    S: Manufacturer=USB ISDN TA
    S: Product=USB ISDN TA
    S: SerialNumber=USB ISDN TA
    C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 64mA
    I:* If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=80 Prot=ff Driver=(none)
    I:* If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=ff Driver=(none)
    I: If#= 1 Alt= 1 #EPs= 8 Cls=0a(data ) Sub=00 Prot=ff Driver=(none)
    E: Ad=05(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=85(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=06(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=86(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=07(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=87(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    I: If#= 1 Alt= 2 #EPs= 7 Cls=0a(data ) Sub=00 Prot=ff Driver=(none)
    E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=4ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=4ms
    E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=16ms
    E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=4ms
    I: If#= 1 Alt= 3 #EPs= 8 Cls=0a(data ) Sub=00 Prot=ff Driver=(none)
    E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=05(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=85(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=06(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
    E: Ad=86(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms

    Exceptions
    hs_main
    23.12.2020 17:31:57 (1)
    File “hs_isdn_data.py”, line 372, in Main
    File “lib_isdn_dispatcher.py”, line 82, in run
    File “lib_serial.py”, line 31, in run
    File “/usr/lib/python2.7/dist-packages/serial/serialposix.py”, line 276, in open
    raise SerialException(“could not open port %s: %s” % (self._port, msg))
    SerialException: could not open port /dev/ttyUSB0: [Errno 2] No such file or directory: ‘/dev/ttyUSB0’

    Schöne Feiertage!