-
AuthorPosts
-
snoopier
Participant2016-11-24 at 21:14Post count: 15Hello,
someone updates to latest version 4.5 ?
best regards
mosjka1
Participant2016-11-27 at 10:58Post count: 41I am looking for it too.
sarnau
Participant2016-11-30 at 23:49Post count: 3No problem at all with the Fujitsu board (with a FacilityServer 4 SN). Launch Expert 4.5 and “Upload Firmware” (via IP). Nothing has changed in the handling of the serial number, serial ports, ethernet and/or disk management.
mosjka1
Participant2016-12-04 at 20:28Post count: 41this method has been also works: http://www.roelbroersma.nl/forums/topic/hs4-update-4-4/
Ichbins
Participant2017-01-05 at 17:45Post count: 7Keine Change, sobald ich die Firmware auf Version 4.5 update, erhalte ich einen Bootloop mit dem Hinweis, dass die Serial/MAC nicht korrekt ist. Hatte seit 4.2 keine Update mehr gemacht. Hat bereits jemand eine Lösung ?
Ichbins
Participant2017-01-07 at 21:07Post count: 7UPDATE: Mein Fehler. Ich hatte das falsche File verwendet. Das Update auf Version 4.5 funktioniert tadellos …
damiandm
Participant2017-10-06 at 08:31Post count: 5Hey.
Könnte bitte jemand ein fertiges VMware Image mit 4.4 oder besser 4.5 zur Verfügung stellen?
:-)
DankeDuCz
Participant2017-10-07 at 21:29Post count: 6Ichbins: Wie bist du vorgegangen? Ich bekomm beim Update von 4.4. auf 4.6 den Kernel Panic – not syncing: Try to kill init! Fehler
chris15
Participant2017-12-03 at 14:48Post count: 1Hi,
kann mir btte jemand Schritt für Schritt erklären wie ich ein Update von 4.2 auf 4.5 machen kann?
Habe die INITRD von der Firmware 4.5 entpackt, die einzelnen Dateien liegen vor.
Wie kann ich diese nun in die VM kopieren?Ein Update über IP geht nicht, da bleibt der HS immer in der Bootschleife hängen.
Vielen Dank,
Gruß
mathschut
Participant2018-01-13 at 23:24Post count: 6Hallo,
weiß jemand wo ich das Update Image für Version 4.5 herbekomme? Bei Gira auf der Seite gibt es nur 4.6.
Opelpower
Participant2018-01-30 at 15:43Post count: 42Hallo zusammen.
Kann ich das Update von 4.4 nach 4.5 (Igel) ganz normal machen, wie ich es auch beim Original HS3 machen würde,
oder muss ich es zwingend nach der oben beschriebenen Update Methode machen??Vielen Dank
bat
Participant2018-11-18 at 10:15Post count: 3Gira hat es nicht mehr. Ich habe etwas bei Feller gefunden, und das ist genau 4.5.0.
https://mam.schneider-electric.com/public/Feller_Experte_Setup_v4.5.zip