goofy79
Participant
Post count: 7

Hi,

first of all – many thanks for your work, with your work i managed to install an HS3 and later an HS4 on a vmware virtual machine :) and it run’s very smooth.

Now i try to install the HS4 on a VIA Epia ML6000eag Board (100% compatible with the original Hardware)
I changed the mac address of the NIC with the eeprom.exe and change the serial number of the mainboard with the smbcfg.exe :)
I have a Compact Flash Card with 4GB on the 3th IDE port with 4 Partitions.
32MB (FAT), 256MB (FAT) and 2x 1770MB (FAT).
Than i install with a DOS 6.22 Boot Disk a DOS on the first partition (format c: /q /s), put the firmware files on it and copy the DOLINUX2.BAT to autoexec.bat.

All runs perfect, but if i got to the expert 4.4 software and transfer my project to the compact flash all right but after a reboot it won’t boot ?
I think they overwrite my partitions ? If i look on the Partition with gparted the first 3 partitions are unknown.
Have you a trick for this problem ?
Or is here a original image from the HS4 Server ?

THX