Hi @sinn3r
I made the calculation very bland, taking the consumption and adding them up… perhaps the best thing would be to make an instrumental measurement..
Question, but my power supply is able to deliver 640ma on a single output even if it is u1+u2 = 640ma?
I don’t understand the sense of having 640ma but being able to use only 320 in the end..
Can you confirm that if u2 is at 0 u1 can absorb 640ma?
p.s.:
I’ll list my devices
ABB power supply s/vs 30.640.3.1 n.1
IP BAOS 773 n.1 15ma
HAGER TE 331 n.1 15ma
SA/S 12.16.5.2 n.1 actuator 12ma
Ekinex ek.FF1-TP actuator n.3 12.5ma
ABB UD/S4.210.2.1dimmer n.2 12.5ma
ABB FCC/S 1.3.1.1 fan coil actuator n.5 12ma
Ekinex EK-CD2-TP interface n.12 using them only as i/o without led i calculated 5ma
ARGUS mtn630919 sensor n.8 8ma
MDT AKD-0224V.02 dimmer n.5
multitouch pro mtn6215-0310 n.4 28ma
siemens QMX3.p74 co2 sensor n.1 12.5ma
ekinex ek-ed2-tp-rw switch with led n.16 15ma
-
This reply was modified 2 months ago by
asdfasdfasd.
-
This reply was modified 2 months ago by
asdfasdfasd.
-
This reply was modified 2 months ago by
asdfasdfasd.